Шнек:

       

        Purpose

        Bulk material is fed at the screw conveyor inlet. Through the electric motor and the reducer rotary motion is given to the screw conveyor.  As it rotates, it pushes the material towards the outlet of the screw  conveyor, where it is fed to the next unit of the installation.

        Main components of the screw conveyor

Body       - cylindrical or trough-shaped
Inlet        - for feeding the transported material
Outlet      - to output the transported material
Gear motor
(Intermediate bearing - necessary for long length)
Spiral screw               - with external/internal diameters and pitch
Bearings                                            

       

       Technical characteristics

Productivity  - m3/h (for example 25)
El. Motor      - kW (eg 3; selected according to performance)
Gear motor  - selected according to performance, dimensions and
                             the other requirements of the assignment
Length        - mm (for example 5500; according to the requirements of
                                   the installation)
Output diameter - mm (for example 240)                                                     

      Non-standard screws and spirals (screw flights)

Outer diameter                      - up to 1000 mm
Thickness of the spiral (coil) - up to 30 mm
Screw conveyor
 length         - up to 20 m

Triple screw conveyor

Large image

U-Trough conveyors

Коритообразни шнекове

Large image

Non-standard screw flight 10mm (1)

Large image

Non-standard screw flight 10mm (2)

Large image

Non-standard screw flight 10mm (3)

Large image